Testing & Quality Control

Knit Fabric Abrasion Test Reports: How Buyers Compare Results

Compare knit fabric abrasion reports by test method, specimen, endpoint and approval criteria. Build a clear buyer review brief for custom knits.

Allen Wang 5 min read
Close-up of pale knitted yarn loops illustrating fabric surface structure, not an abrasion-tested specimen.

Before comparing knit fabric abrasion results, check what was tested, how it was tested and what counted as the endpoint. A large cycle count without those details is not enough to choose a fabric for a fleece jacket, training top or other apparel program. Ask for the complete report and connect it to the sample you are actually buying.

Image note: the featured stock photograph illustrates knitted surface structure only. It is not a tested specimen, an abrasion result or evidence of WellDoneTex production-lot performance. Photo by engin akyurt on Unsplash.

This guide helps purchasing and development teams turn an abrasion claim into a clear review brief. It does not set a universal pass level or report test results for WellDoneTex fabrics.

First decide: breakdown resistance or appearance change?

The ISO Martindale series separates different questions. ISO 12947-2 evaluates specimen breakdown through inspections at set intervals. ISO 12947-4 assesses changes in appearance. A report answering one question should not be presented as evidence that the other requirement has been met.

For your buying brief, describe the concern in plain language: visible surface wear on a brushed face, or damage that compromises the fabric structure. If both matter, ask the laboratory which evaluations are suitable and specify separate acceptance criteria. Do not leave the lab to infer the commercial requirement from the word “durable.”

Read the method before the number

ASTM D4966 covers Martindale abrasion testing and generally applies to knits, wovens and nonwovens, although specimen-holder capacity can limit the thickness that can be tested. Its published guidance warns about poor between-laboratory precision and does not recommend the method for commercial-shipment acceptance testing.

Consequently, avoid making a shipment-release decision from an isolated D4966 number. Agree the review process with your technical team, supplier and laboratory before sampling, including how a disputed result will be investigated. Abrasion data alone should not be translated into a promised number of months or washes of garment life.

Six checks before comparing two reports

  • Sample identity: match the report to the fabric code, composition, construction, weight, finish, color and development revision. Record whether the specimen came from a development sample or an identified bulk lot.
  • Test route: obtain the full standard designation and edition, not just “Martindale.” Ask the laboratory to identify any deviations and confirm that the chosen method suits the material.
  • Tested surface: identify the face or back. For brushed or double-faced material, state which side represents the garment’s intended exposure. Do not treat a reverse-side result as a face-side result.
  • Specimen state: record whether the specimen was tested as received or after a specified pretreatment. If washing is requested, give the laboratory the agreed procedure rather than the vague instruction “after wash.”
  • Conditions and endpoint: ask for the applicable load or pressure, abradant, inspection intervals, individual results and the reported endpoint. Test conditions affect abrasion results; compare them before comparing counts.
  • Evidence and decision: request clear identification on photographs where supplied, the laboratory’s observations and a statement of what was actually evaluated. Keep your commercial approval and its limitations with the report.

A comparison example: why the larger number may not answer your brief

Hypothetical example, not a WellDoneTex test or customer case: Sample A has a report describing breakdown resistance. Sample B has an appearance assessment after an agreed exposure. The buyer’s concern is visible wear on the outside of a brushed jacket. These reports cannot be ranked by their headline figures because they do not document the same outcome.

The useful next step is to ask for a matching appearance evaluation on both intended outer faces, using a method and conditions confirmed by the laboratory. Keep any breakdown evaluation as a separate line in the approval file. This avoids paying for a repeat test that still answers the wrong question.

Keep abrasion, pilling and product approval separate

An abrasion report should not be relabeled as an anti-pilling certificate. If the purchase specification includes pilling, shrinkage, colorfastness or stretch recovery, request the relevant evidence for each requirement. Use a review sheet with separate rows rather than a single “quality passed” box.

For fleece, include the approved brushing and finish in the sample identity. For stretch knits, ask the laboratory to confirm preparation and mounting requirements. For coated or laminated materials, do not assume ISO 12947-2 applies: its published scope excludes those fabrics. Confirm a suitable test route before sending specimens.

What to send with an abrasion-testing inquiry

Start with the garment use and the area of concern. Then send your fabric specification, reference sample identification, requested method if your brand has one, intended tested surface, pretreatment requirement and proposed acceptance criterion. If the criterion is still undecided, say so and ask for technical review before testing is commissioned.

Use our fabric specification checklist to assemble the underlying material details. Add total order weight and the planned quantity per color so the technical discussion stays connected to a workable buying program.

WellDoneTex develops made-to-order fleece and other knit fabrics, rather than supplying ready stock. Orders normally start at 1,000 kg in total, with a usual minimum of 400 kg per color. These are planning requirements, not a promise that every construction or color plan is feasible. Confirm the specific fabric, testing scope, quotation and production schedule for your project.

Send your fabric specification and abrasion-review brief. Include the report you need help interpreting and identify what is missing; avoid sending only a cycle count.

Buyer questions

Is there one Martindale pass level for all fleece apparel?
No universal pass level is proposed here. Define the product requirement and suitable method with the responsible technical team and laboratory; do not borrow a threshold from a different end use.

Does a passing abrasion result approve the whole fabric?
No. Record exactly which requirement the report supports. Keep the other agreed material, appearance and performance checks open until their evidence is reviewed.

Can two laboratories’ results be compared directly?
Do not assume they are interchangeable. Check the sample and method details first, and involve the laboratories if results conflict. A new test should resolve a defined uncertainty, not simply replace an inconvenient number.

Share this guide LinkedIn WhatsApp
Allen Wang

Allen Wang

Founder of welldonetex, confident and optimistic, self-driven personality, committed to better popularization of textile knowledge and textile product services.

Have a material question?

Discuss the sample and specification behind your next garment.

Send Fabric Specs